CA Foundation Business Economics Study Material – Internal and External Economies

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Internal and External Economies

Internal Economies and Diseconomies

  • Internal economies are those benefits which accrue to a firm when it expands the scale of production.
  • Internal economies are the result of the firm’s own efforts independent of the actions of other firms.
  • These economies are particular to the individual firms and are different for different firms depending upon the size of the firm.

The main types of internal economies are as follows

1. Technical Economies:

– The large scale production is associated with technical economies.
– As the firm increases its scale of production, it becomes possible to use better plant, machinery, equipment and techniques of production.
– Following are the main forms (causes/reasons) of technical economies

  • Economies of superior techniques
    – A large sized firm can use sophisticated and costly machines and equipments.
    – Use of superior techniques reduces the cost of production per unit and increases aggregate output.
  • Economies of increased dimensions
    – A large firm can get the mechanical advantage in using large machines and other mechanical units to produce more output.
    – E.g. A Large boiler, large furnace, etc. can be operated by same team as required by smaller boiler, furnace, etc.
  • Economies of linked processes
    – A large sized firm can develop its own sources of raw material, means of transportation, distribution system, etc.
  • Economies of the use of By-products
    – A large sized firm can avoid all kinds of wastage of materials. The firm can use its by- products and waste material to produce another material.
    – E.g.- Sugar industry can make alcohol out of the molasses.
  • Economies of specialization
    – A large sized firm can introduce greater degree of division of labour and specialisation.

2. Managerial Economies:

  • Large sized firms can introduce division of labour in managerial tasks.
  • They can employ business executive of high skill and qualification to look after the functioning of various departments like production, finance, sales, advertising, personnel, etc.
  • This helps to increase the efficiency and productivity of managers resulting in reduction in managerial costs.

3. Commercial Economies:

  • A large sized firm is able to reap economies of bulk purchases.
  • It can get discounts from suppliers, railways, transport companies, etc.
  • It enjoys prompt and regular supply of raw materials.
  • A large sized firm can also afford to spend large amount of money on advertising, publicity, etc.
  • It can also give various concessions to wholesale and retail dealers and customers and thus capture markets for its product.

4. Financial Economies:

  • A big firm enjoys goodwill among lenders or investors.
  • For raising finance it can either borrow from bank as it can offer better security or it can raise finance by issuing shares, debentures and by inviting public deposits. Such opportunities are not available to small firms.

5. Risk Bearing Economies:

  • A large firm is better placed to face the uncertainties and risks of business.
  • A big firm producing many variety of goods is in a better position to withstand economic ups and downs. Therefore, it enjoys economies of risk bearing.

Internal diseconomies means all those factors which raise the cost of production per unit of a particular firm when the scale of production is expanded beyond the point of optimal capacity.

Such diseconomies of scale are as follows

1. Production Diseconomies:

  • Production diseconomies sets in when expansion of firm’s production beyond optimum size leads to rise in the cost per unit of output.
  • E.g. Use of inferior or less efficient factors due to non-availability of efficient factors raises the per unit cost of output.

2. Managerial Diseconomies:

  • As the scale of production increases burden on management also increases.
  • Co-ordination of work among different departments becomes difficult. Supervision and control over the activities of subordinates becomes difficult, decision taking is delayed, etc.
  • As a result, wastage increase and the efficiency and productivity decrease.
  • Per unit cost starts rising.

3. Technical Diseconomies:

  • Every equipment has an optimum point at which it works more efficiently and economically.
  • Beyond optimum point they are overworked and may result in breakdowns, heavy cost of maintenance, etc.

4. Financial Diseconomies:

  • Expansion of production beyond the optimum scale results in increase in the cost of capital.
  • It may be due to increased dependence on external finances.

5. Marketing Diseconomies:

  • Selling diseconomies set in if the scale of production is expanded beyond optimum level.
  • The advertisement expenditure and marketing overheads increase more proportionately with the scale.

External Economies and Diseconomies

  • External economies are those benefits which accrue to all the firms operating in a given industry from the growth and expansion of that industry.
  • External economies are not related to an individual firm’s own cost reduction efforts.
  • These are common to all the firms in an industry and shared by many firms or industries.

The main types of external economies are as follows

1. Technological Economies:

  • When the whole industry expands, it may result in the discovery of new technical knowledge, firms pool manpower and finance for research and development resulting in new and improved methods of production and new inventions.
  • Use of improved and better machinery improves production function and cost of production per unit falls.

2. Economies of Localization:

  • When in an area, many firms producing the same commodity are set up, it is called localization of an industry.
  • Due to localization there is expansion of railways, post & telegraph, banking services, insurance, setting up of booking offices by transport, companies, setting § up of powerful transformer by electricity department, etc.
  • All the firms get these facilities at low prices.

3. Economies of Information:

  • As pointed earlier, firms pool their resources for research and development.
  • All firms get the benefit of the research in terms of market information, technical information, information about governments economic policies, information about availability of new source of raw material, etc.
  • Also, specialized journals give information about latest developments.

4. Cheaper Inputs:

  • When an industry expands its needs for raw materials, machines, etc. also expand.
  • This may result in exploration of new and cheaper sources of raw materials, machinery, etc.
  • Also, the industries producing such inputs also expand in scale.
  • Therefore, they can supply these inputs at lower prices.
  • As a result the cost of production per unit of the firm using these inputs falls.

5. Growth of Ancillary Industries:

  • With the growth of an industry, many firms specialized in the production of inputs like raw material, tools, machinery, etc. come up.
  • Such firms are called ancillary units which provides inputs at lower cost to the main industry.
  • Likewise, some firms may get developed by processing the waste products of the industry.
  • Thus, wastes are converted into by-products. This reduces the cost of production in general.

6. Development of Skilled Labour:

  • When an industry expands specialized institutions like colleges, training centers, management institutes, etc. develop.
  • This results in continuous availability of skilled labour like technicians, engineers, management experts, etc.

7. Better transportation & Marketing Facilities:-

  • When an industry expands many specialized transporters also develop.
  • The firm in need of specialized transport service can get them easily at cheaper rates.
  • Also many new marketing outlets and specialized marketing institutions develop. The firm need not spend on developing its own marketing outlets.
  • This reduces the cost.

The growth and expansion of an industry in a particular area beyond optimum level results in many disadvantages for firms in the industry. Such disadvantages increases the costs of production of each firm. Therefore, they are called external diseconomies. Some of the external diseconomies are as follows:

1. Diseconomies of Scarcity of Inputs:

  • When an industry expands its need for raw materials, machines, tools and equipments, etc. also expands.
  • Some inputs are such which cannot be totally substituted.
  • The firms supplying these inputs come under pressure and may supply inputs at a higher price.
  • This raises the cost of production per unit of the firm who uses these inputs.

2. Diseconomies of Strains on Infrastructure:

  • Due to concentration of firms in an area infrastructural facilities become inadequate over a time.
  • E.g. Excessive pressure on transport system results in delayed transportation of raw materials and finished goods.
  • Other facilities like electric power supply, communication system, water supply, etc. are also over taxed.
  • This puts strain on infrastructural facilities resulting in increased cost of production. ’

3. Diseconomies of High Factor Prices:

  • With the concentration of an industry in a particular area, the demand for factors of production rises.
  • Thus, the prices of the factors of production go up resulting in increased cost of production.

4. Diseconomies of Expenditure on Advertising:

  • Expansion of an industry also means increase in the number of firms.
  • This means increase in competition among the firms.
  • This forces a firm to spend more and more on advertising.
  • This raises per unit cost.

Internal and External Economies

S.No INTERNAL ECONOMIES EXTERNAL ECONOMIES
1.
  • Internal economies are the benefits which accrue to a firm when it expands the scale of production.
  • External economies are those benefits which accrue to all the firms operating in a given industry from the growth and expansion of that industry.
2.
  • Internal economies are called ‘internal’ because these arise due to the internal efforts of the firm.
  • These economies are specific to the individual firm and are different for different firms depending upon the size of the firm.
  • External economies are called ‘external’ because they accrue to a firm as a result of factors that are entirely outside the firm i.e. from the expansion of the industry.
3.
  • Internal economies are the result of the firm’s OWN EFFORTS INDEPENDENT OF THE ACTIONS OF OTHER FIRMS.
  • These economies are peculiar to each fir m.
  • It reflects the working pattern of the firm.
  • External economies are independent of firm’s own efforts and output.
  • They are dependent on the general development of the industry.
  • They are not restricted to a single firm but are shared by a number of firms.
4.
  • Internal economies cause the long-run average cost to fall in the initial stage and internal diseconomies cause the long-run average cost to rise at the later stage.
  • Thus, the shape of LAC curve is determined by internal economies and diseconomies as scale expands.
  • External economies and diseconomies cause the LAC curve to shift down or up as the case may be.
  • When external economies increase, the cost per unit of output falls.
  • So, LAC curve shift downwards.
  • When external diseconomies are more, the cost per unit of output rises.
  • So, LAC curve shift upwards.
5. CA Foundation Business Economics Study Material Internal and External Economies 1 CA Foundation Business Economics Study Material Internal and External Economies 2
6.
  • If every thing is effectively managed, internal economies can be of long term in nature.
  • External economies depend upon the conditions of the entire industry and economy.
  • Thus, it can be of short term in nature.
7.
  • Internal economies are in the form of technical economies like superior techniques, use of by- products, etc.; managerial economies; commercial economies; financial economies and risk-bearing economies.
  • External economies are in the form of cheaper inputs; discovery of new technical knowledge; development of skilled labour; economies of information; growth of ancillary units; better transport and marketing facilities.

CA Foundation Business Economics Study Material – Production Optimisation

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Production Optimisation

Production Optimisation
Isoquants:

An iso-product curve or isoquant is a curve, which represents the various combinations of two variable inputs that give the same level of output. As all combinations on the iso-product curve give the same level of output, the producer becomes indifferent to these combinations. That is why iso-product curve are also called ‘production indifference curve’ or ‘equal product curve’. To understand consider the following production isoquant schedule.

CA Foundation Business Economics Study Material Production Optimisation 1

In the schedule I above, the producer is indifferent whether he gets combination A, B, C, D or E. This is because all the combinations of capital and labour give the same level of output i.e. 100 units.

By plotting the above combinations on a graph, we can derive an iso-product curve as shown in the following figure:

CA Foundation Business Economics Study Material Production Optimisation 2

In the diagram, quantity of capital is measured on X-axis and quantity of labour on Y-axis.

The various combinations A, B, C, D, E of capital and labour are plotted and on joining them we derive an iso-product curve. All combinations lying on the iso-product curve yield the same level of output i.e. 100 units and hence technically equally efficient.

If the production schedule II is also plotted on the graph, we will get another iso-product curve IQ200. This will lie above the IQ100 as the combinations contain greater quantities of capital and labour. A set of iso-product curves is called iso-product curve map.

CA Foundation Business Economics Study Material Production Optimisation 3

In the diagram, it can be observed that each iso-product curve is labelled in terms of output. All combinations lying of IQ100 give the output of 100 units and all the combinations lying on IQ200 give the output of 200 units. Higher iso-product curve represent higher level of output. Also it indicates how much more output can be achieved.

Marginal Rate of Technical Substitution
The rate at which one factor of production is substituted in place of the other factor without any change in the level of output is called as the marginal rate of technical substitution. Consider the following schedule.

CA Foundation Business Economics Study Material Production Optimisation 4

Each of the factor combinations in the table above yields same level of output. Moving from combination A to B, one unit of capital replaces 4 units of labour. Similarly, moving from B to C, one unit of capital now replaces only 3 units of labour and so on. It implies that labour and capital are imperfect substitutes. That is why MRTSKL is continuously diminishing. We can measure MRTSKL on an iso-product curve.

‘Iso-Cost Line’ OR ‘Equal Cost Lines’
Iso-cost line (also known Equal Cost Line; Price Line; Outlay Line; Factor Price Line) shows the various combinations of two factor inputs which the firm can purchase with a given outlay (i.e. budget) and at given prices of two inputs.

Example. A firm has with itself Rs. 1,000 which it would like to spend on factor ‘X’ and factor ‘Y’.
Price of factor ‘X’ is Rs. 20 per unit.
Price of factor ‘Y’ is Rs. 10 per unit.
Therefore, if the firm spends the whole amount on factor X, it can buy 50 units of X and if the whole amount is spent on factor Y, it can buy 100 units of Y. However, in between these two extreme limits, it can have many combinations of X and Y for the outlay of Rs. 1,000. Graphically it can be shown as follows –

CA Foundation Business Economics Study Material Production Optimisation 5

In the diagram OP shows 100 units of Y and OM shows 50 units of X. When we join the two points P and M, we get the iso-cost line. All the combinations of factor X and factor Y lying on iso-cost line can be purchased by the firm with an outlay of Rs. 1,000. If the firm increases the outlay to Rs. 2,000, the iso-cost line shifts to the right, if prices of two factors remains unchanged. The slope of the iso-cost line is equal to the ratio of the prices of two factors. Thus,
CA Foundation Business Economics Study Material Production Optimisation 6

Producer’s Equilibrium OR Production Optimization
A firm always try to produce a given level of output at minimum cost. For this it has to use that combination of inputs which minimizes the cost of production. This ensures maximization of profits and produce a given level of output with least cost combination of inputs. The least-cost combination of inputs or factors is called producer’s equilibrium or production optimization. This is determined with the help of (a) isoquants, & (b) iso-cost line.

An isoquant or iso-product curve is a curve which shows the various combinations of two inputs that produce same level of output. The isoquants are negatively sloped and convex to origin. The slope of isoquants shows the marginal rate of technical substitution which diminishes. Thus, MRTSxy
CA Foundation Business Economics Study Material Production Optimisation 7
Iso-cost line shows the various combination of two factor inputs which the firm can purchase with a given outlay and at given prices of inputs. There can be different outlays and hence different iso-cost lines. Slope of iso-cost line shows the ratio of the price of two inputs i.e. Px/Py

CA Foundation Business Economics Study Material Production Optimisation 8

Which will be the least cost combination can be understood with the help of following figure. Suppose firm wants to produce 300 units of a commodity. It will first see the isoquant that represents 300 units.

In the adjoining diagram we find that all combinations a, b, c, d and e can produce 300 units of output. In order to produce 300 units firm with try to find out least cost combination. For this it will super impose the various iso-cost lines on isoquant as shown in the diagram. The diagram shows that combination ‘C’ is,the least cost combination as here isoquant is tangent to iso-cost line HI. All other combinations a, b, d and e lying on isoquant cost more as these points lie on higher iso-cost lines. Hence, the point of tangency of isoquant and iso-cost line shows least cost combination. At the point of tangency.

Slope of iso-quant = Slope of iso-cost line

CA Foundation Business Economics Study Material Production Optimisation 9
Thus, the firm will choose OM units of factor X and ON units of factor Y and be at equilibrium as the marginal physical products of two factors are proportional to the factor prices.

CA Foundation Business Economics Study Material – Law of Returns to Scale

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Law of Returns to Scale

Law of Returns to Scale

  • The Law of Returns to Scale examines the production function i.e. the input – output relation in long run where increase in output can be achieved by varying the units of ALL FACTORS IN THE SAME PROPORTION.
  • Thus, in long run all factors become variable.
  • It means that in long run the scale of production and the size of the firm can be increased.

The law of returns to scale analyse the effects of scale on the level of output as-

  1. Increasing Returns to Scale:
    • When the output increases by a greater proportion than the proportion increases in all the factor inputs, it is increasing returns to scale.
    • E.g. When all inputs are increased by 10% and output rises by 30%.
    • The reasons of increasing returns to scale are – internal and external economies of scale; indivisibility of fixed factors; improved organisation; division of labour and specialisation; better supervision and control; adequate supply of productive factors, etc.
  2. Constant Returns to Scale:
    • When the output increases exactly in the same proportion as that of increase in all factor inputs, it is constant returns to scale.
    • E.g. – When all inputs are increased by 10% and output also rises by 10%.
    • The reason of constant returns to scale is that beyond a certain point, internal and external economies are NEUTRALISED by growing internal and external diseconomies.
  3. Diminishing Returns to Scale:
    • When the output increases by a lesser proportion than the proportion increase in all the factor inputs, it is diminishing returns to scale.
    • E.g. When all inputs are increased by 20% but output rises by 10%.
    • The reason of diminishing returns to scale is increased internal and external diseconomies of production.
    • Internal diseconomies like difficulties in management, lack of supervision and control, delay in decision-making etc.
    • External diseconomies like insufficient transport system, high freights, high prices of raw materials, power cuts, etc.

The law of returns to scale can also be illustrated with the help of the following schedule and diagram.
CA Foundation Business Economics Study Material Law of Returns to Scale 1
CA Foundation Business Economics Study Material Law of Returns to Scale 2

Returns to Factor and Returns to Scale

Returns to Factor Returns to Scale
1. Meaning
  • Returns to factor refers to the various production sizes where one factor is variable and other factor of production are fixed.
  • In other words, it examines production function when the output is increased by varying the quantity of one input.
  • It examines the effect of CHANGE IN THE PROPORTIONS between inputs on output.
  • Returns to scale refers to the various production sizes where increase in output can be achieved by varying the units of ALL FACTORS in the SAME PROPORTIONS.
  • It show the effects on output when all factor inputs are varied in the same proportion simultaneously.
2. Nature of Inputs
  • Quantities of some inputs are fixed while the quantities of other inputs vary.
  • In other words, there are FIXED and VARIABLE factors of production.
  • Quantities of all inputs can be varied.
  • In other words, all factors of production are VARIABLE.
3. Time Element
  • Returns to factor is called a SHORT RUN production function.
  • Returns to scale is called a LONG RUN production function.
4. Application
  • It does not apply where the factors must be used in fixed proportion to produce a commodity.
  • It does apply where the factors must be used in fixed proportions to produce a commodity.
5. Stages of Law
  • The law has three stages namely –
    (a)    Increasing Returns to factor,
    (b)   Diminishing Returns to Factor, &
    (c)   Negative Returns to factor ‘
  • Of the three stages, diminishing returns pre-dominate.
  • The law has three stages namely –
    (a)    Increasing Returns to Scale,
    (b)   Constant Returns to Scale,
    (c)   Diminishing Returns to Scale.
  • All the three stages of return appear.
6. Causes of Operation
  • Increasing returns to factor is due to indivisibility of fixed factors and division of labour and specialisation.
  • Diminishing returns is due to non- optimal factor proportion and imperfect substitutability of factors.
  • Negative returns fall in the efficiency of fixed and variable factors.
  • Increasing returns to scale is due to increased internal and external economies.
  • Constant returns to scale is due to the fact that internal and external economies are neutralised by growing internal and external diseconomies.
  • Diminishing returns is due to internal and external diseconomies of scale.
7. Scale of Production
  • The scale of output is unchanged and the production plant or the size and efficiency of the firm remain constant.
  • This is because, only one factor is variable and all other factors are fixed.
  • The scale of output can be increased and so the size of the firm too can be expanded.
  • This is because all factors are variable and hence can be increased in the same proportion simultaneously.

CA Foundation Business Economics Study Material – Law of Variable Proportions

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Law of Variable Proportions

Law of Variable Proportions

  • The Law of Variable Proportions examines the production function i.e. the input-output relation in short run where one factor is variable and other factors of production are fixed.
  • In other words, it examines production function when the output is increased by varying the quantity of one input.
  • Thus, the law examines the effect of change in the proportions between fixed and variable factor inputs on output in three stages viz. Increasing returns, diminishing returns and negative returns.

Statement of the Law :-
“As the proportion of one factor in a combination of factors is increased, after a point first the marginal and then the average product of that factor will diminish”. (F. Benhan)

The law operates under some assumptions which are as follows:-

  1. There is only one factor which is variable. All other factors remain constant.
  2. All units of variable factor are homogeneous
  3. It is possible to change the proportions in which the various factors are combined.
  4. The state of technology is given and is constant.

The three stages of the law can be explained with the help of the following schedule and diagram.

CA Foundation Business Economics Study Material - Law of Variable Proportions

Stage I: The Law of Increasing Returns to Factor –

  • During this stage, total product (TP) increases at an increasing rate upto the point of inflexion ‘I’ and thereafter it increases at diminishing rate.
  • This is because marginal product (MP) of the variable factor increases upto point ‘M’ on MP curve and then start falling.
  • Rising MP also pulls up average product (AP), which goes on rising, in the first stage.
  • Rising AP indicates increase in the efficiency of variable factor i.e. labour.
  • Stage I ends where AP is maximum and is equal to MP as shown by point ‘C’ in the diagram.

The law of increasing returns operates because of the following two reasons:

1. Indivisibility of fixed factors

  • Due to indivisibility, the quantity of fixed factors is more than the quantity of variable factors.
  • So when the quantity of variable factors is increased to work with fixed factors, output increases speedily due to full and effective utilisation of fixed factors.
  • In other words, efficiency of fixed factors increases.

2. Efficiency of Variable Factor Increases
Due to increase in the quantity of variable factor, it becomes possible to introduce DIVISION OF LABOUR leading to SPECIALISATION. This results in more output per worker.

Stage II: The Law of Diminishing Returns to Factor –

  • In second stage, TP continues to increase at diminishing rate. It reaches the maximum at point ‘D’ in the diagram, where the second stage ends.
  • In this stage, both AP and MP of variable factor are falling- though remains positive. That is why this stage is called as the stage of diminishing returns.
  • At the end of this stage MP becomes, zero as shown by point ‘B’ in the diagram and corresponding to highest point ‘D’ on TP curve.

The law of diminishing returns operate due to the following two reasons:

1. Indivisibility of fixed factors

  • Once the optimum proportion between indivisible fixed factors and variable factors is reached (as in Stage I) with any further increase in the quantity of Variable factor, the fixed factors become inadequate and are overutilised.
  • The fine balance between fixed and variable factor gets disturbed. This causes AP and MP to diminish.

2. Imperfect Substitutability of factors

  • Variable factors are not perfect substitute of fixed factors.
  • The elasticity of substitution between factors is not infinite.

Stage III: The Law of Negative Returns to Factor –

  • In third stage, TP falls and so, TP curve slopes downward. MP becomes negative and the MP curve goes below the X-axis. AP continues to fall.
  • As the MP of variable factor becomes negative, this stage is called the stage of negative returns.
  • In this stage the efficiency of fixed and variable factors fall and factor ratio becomes highly sub-optimal.

The law of negative returns operate due to the following reasons:

  1. The quantity of the variable factor becomes too excessive compared to fixed factors. They get in each other’s way and so TP falls and MP becomes negative.
  2. Too large number of variable factors also reduce the efficiency of fixed factors.

Conclusion -Where to operate?

  1. A rational firm will not produce either in Stage I or in Stage III.
  2. In stage I, the marginal product of fixed factor is negative as its quantity is more than variable factor.
  3. In stage III, the marginal product of variable factor is negative as its quantity is too large than fixed factor.
  4. Therefore, firm would seek to produce in Stage II where both AP and MP of Variable factor are falling.
  5. At which point to produce in this stage will depend on the prices of factor inputs.

CA Foundation Business Economics Study Material – Meaning of Production

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Meaning of Production

Meaning of Production

  • Production is one of the important economic activity that takes place in any economy apart from consumption and investments.
  • An individual firm is the micro-economic unit which undertake the production of goods and services.
  • A firm’s survival depends upon whether it is able to achieve optimum efficiency in production by minimizing the cost of production.
  • Production is the transformation of resources into goods and services. In other words, production is the act of transformation of INPUTS into OUTPUT which satisfies the wants of some people.
    E.g.- Inputs of sugarcane, capital and labour are used to produce SUGAR.
    Production also includes production of SERVICES like those of lawyers, teachers, doctors, etc.
  • The amount of goods and services that an economy is able to produce determines whether it is rich or poor. A country like U.S.A. is a rich country as its production level is high.
  • Man cannot create or destroy matter.
  • In Economics, the term production means creation of economic utilities in the matter i.e. in the things that already exist.
  • Thus, production means creation of those goods and services which have economic utilities i.e. exchange value.
  • According to James Bates and J.R. Parkinson, “Production is the organized activity of transforming resources into finished products in the form of goods and services; and the objective of production is to satisfy the demand of such transformed resources.”
  • Professor J. R. Hicks has defined production “as any activity whether physical or mental, which is directed to the satisfaction of other people’s wants through exchange.”
  • The definition indicates that the term production covers the whole process from creation of utilities till the satisfaction of human wants.

Utilities may be created or added in many ways, such as :-

1. Form Utility

  • It is created by changing the form of raw materials into finished goods for man’s use.
  • E.g. converting raw cotton into cotton fabric.
  • Form utility is created by manufacturing industries.

2. Place Utility

  • It is created by transporting goods from one place to another.
  • E.g. when goods are taken from factory to marketplace, place utility is created.
  • Transport services are involved in creation of place utility.

3. Time Utility

  • It is created by making things available when they are required.
  • E.g. Banks create time utility by granting overdraft facilities.

4. Service Utility (Personal Utility)

  • It is created by providing personal services to the customers by professionals likes lawyers, doctors, bankers, shopkeepers, teachers, transporters, etc

CA Foundation Business Economics Study Material – Business Cycle

CA Foundation Business Economics Study Material Chapter 5 Business Cycle

All countries have gone through fluctuations in economic activities i.e. ups and downs in its economic activities. In other words, every country passes through a pattern where there are period of economic growth, followed by periods of slowing growth and even failing growth. There are periods of prosperity followed by downturns. Thus,

“The Business Cycle is the periodic fluctuations in economic activity measured by change in Real GDP.”

Although these economic fluctuations are recurrent and occur periodically, they are not at regular interval and are not of same length.

Phases of Business Cycle

A business cycle passes through the following four distinct phases:

  1. Expansion/Boom/ Recovery/ Upswing
  2. Peak/Boom/Prosperity
  3. Contraction/Recession/ Downswing
  4. Trough/Depression

The following figure shows the four stages of the business cycle.
CA Foundation Business Economics Study Material Business Cycle

In the figure above the four phases business cycles are shown. The broken line represents long time growth trend or potential GDP. It shows rising trend of growth over a period of time. The figure starts from Trough when the overall economic activities ie. level of production and employment are at the lowest level. With increase in the economic activities the economy moves into Expansion Phase. But expansion phase cannot continue indefinitely, and after reaching Peak, economy starts contracting i.e. Contraction Phase sets in and continue till it reaches the lowest turning point called Trough. Here cycle completes and new cycle starts.

Expansion

In the expansion phase, there is increase in OUTPUT and EMPLOYMENT. Expansion phase is characterized by-

  1. increase in national output,
  2. increase in employment,
  3. increase in aggregate demand,
  4. increase in capital i.e. investments,
  5. increase in consumer spending,
  6. increase in sales, profits, stock prices, & expansion of bank credit.
  7. increase in standard of living.

There is no INVOLUNTARY UNEMPLOYMENT and whatever unemployment exist is only of FRICTIONAL or STRUCTURAL in nature.
The growth ultimately slows down and reaches its peak.

Peak

Peak phase of the cycle is the highest point. The economy is producing at its maximum level. The economy becomes overheated i.e. unsustainable. The expansion phase ends here. The prices of inputs increase, resulting higher cost of production, leading to higher output prices. Higher output price leads to increased cost of living. Fixed income earners and consumers suffer. Economic growth stabilizes at peak an then starts the downswing.

Contraction

In contraction phase. There is fall in OUTPUT and EMPLOYMENT levels. Contraction phase is characterized by—

  1. fall in the level of investments,
  2. fall in the level of production and employment,
  3. fall in the incomes of people,
  4. demand and consumption of both capital goods and consumer goods fall,
  5. bank credit, shrinks as investments fall,
  6. stock prices fall,
  7. firms become pessimistic about future,
  8. there is lot of excess production capacity in industries.

There is large scale involuntary unemployment.

A severe contraction or recession of economic activities pushes the economy into Depression.

Trough and Depression

The lowest level of economic activity is called trough or depression. All economic activity touch the bottom and the phase of trough is reached. Trough is the turning point into expansion. Increased investments lead to increase in consumption. Therefore, industries expand production and start using their idle production capacity and rate of unemployment falls. With this the cycle is complete.

It is very difficult to predict turning points of business cycles. Changes in different economic activities is used to measure the business cycle and to predict in which direction the economy is headed. There are three types of economic indicators, depending on their timing namely—

  1. Leading Indicators,
  2. Lagging Indicators, and
  3. Coincident Indicators

Leading Indicators signal future changes

  • Leading Indicators change before the economy itself changes Le. change prior to large economic adjustments.
    E.g.– changes in stock prices, profit margins and profits, the house market, manufacturing activity, etc. Leading Indicators should be used with caution as they may not be always accurate.
  • Lagging Indicators usually change after the economy as a whole changes i.e. after the real output changes. Lagging Indicators are useful to confirm the business cycle.
    E.g.– unemployment, the consumer price index, interest rates, lending by banks, etc.
  • Coincident Indicators also called Concurrent Indicators occur at about the same time with business cycle movements. They give us idea about current state of economy.
    E.g.
    – GDP, inflation, industrial output, personal income, etc.

Features of Business Cycles

  • Business cycles occur periodically. They do not show same regularity, duration and intensity.
  • The length of different phases of business cycles is not definite and hence do not show smoothness and regularity.
  • Business cycles do not bring about changes in one industry or sector but occur simultaneously in all industries and sectors. Further, it passes from one industry to another.
  • Fluctuations take place not only in the level of output but also in other related variables like consumption, employment, investment, interest rates and price level.
  • Cyclical fluctuations affect adversely the consumption of durable goods like capital goods, scooters, cars, houses, refrigerators, etc. Their demand falls. As a result investments become unstable.
    However, consumption of non-durable goods and services does not vary much during different phases of business cycle. .
  • Business cycles causes lot of uncertainty for businessmen and forecasting becomes difficult. Profits fluctuate.
  • Business cycles affect the inventories of goods. During depression inventories start accumulation more than the desired level. This results reduction in the production. When recovery starts, inventories are below the required level.
  • Business cycles are international in character.

Causes of Business Cycles

Business Cycles may occur due to internal and external causes or a combination of both.

Internal Causes (Endogenous Factors): Internal causes of business cycle are those, which are built within the economic system. They are—

1. Fluctuations in Effective Demand:
Fluctuations in economic activities is due to fluctuations in aggregate effective demand. When aggregate demand falls, it results in lower output, income and employment. This causes a downward spiral. Increase in aggregate demand causes conditions of expansion and boom.

2. Fluctuations in Investments:
Investments fluctuate because of changes in profit expectations of entrepreneurs. High investments brings increase in aggregate demand and thus result in upswing and vice versa.

3. Variations in government spending:
Fluctuations in government spending affects the economic activities and results in business fluctuations.

4. Money Supply:
According to Hawtrey and Friendman, business cycles relate to fluctuations in money and credit supply. Cheap money policy leads to expansion of money and credit supply resulting in increased economic activities and vice versa. .

5. Monetary and Fiscal Policies:
Monetary and Fiscal Policies also cause business cycles. Expansionary policies, like low interest rates, rates increased government spending and tax cuts boost economic activities. It there is inflation opposite will be done resulting in showing down of economy.

6. Psychological Factors:
According to Pigou, business cycles appear because of the optimistic and pessimistic mood of the business community. It business community is optimistic about future market conditions, they make investments. Here, the expansion phase starts ultimately leading to boom and vice versa.

7. Other Factors:
According to Schumpeter, business cycles occur due to innovations that take place from time to time in economic system. (Innovation Theory)
According to Nicholas Kaldor, the present fluctuations in prices are responsible for fluctuations in output and employment in future (Cobweb Theory)

External Causes (Exogenous Factors):

1. Wars:
During war time, all the available resources are used up for the production of arms and ammunitions. This results in the fall of production of capital and consumer goods. This in turn causes fall in income, profits and employment and contraction in economic activities take place which may lead to depression.

2. Post War Reconstruction:
After war, the level of consumption and investment goes upward. Both the government and individuals are involved in construction. E.g.- houses, roads, bridges, communication, etc. The economy picks up resulting in higher output, employment and income.

3. Technology:
Another cause of business is scientific development leading to improved technology. Adoption of new technology for production of new and better goods and services require huge investments. Increased investments increases employment income and profits this gives boost to the economy.

4. Natural Factors:
Weather cycles causes fluctuations in agricultural output. If in any year, weather is good the output of agriculture sector will increase. This will also increase the demand for industrial goods and vice versa.

5. Population Growth:
If the population growth rate is higher than the economic growth rate, income level will be low. This will result is lower savings and investments and therefore, lower income and employment.

Relevance of Business Cycles in Business Decision Making

  • Understanding the business cycle is important for all types of business enterprises because it affects the demand for their product and in turn their profits.
  • Knowledge of business cycles, its phases and characteristics help the business enterprises to frame appropriate policies. E.g.-New opportunities for investment, employment and production opens up at the time of prosperity. So understanding the economic environment is important white making business decisions.
  • Business managers have to advantageously respond in complex time during the whole business cycle through boom, downswing, recession and recovery to arrive at sound strategic environment.
  • We have seen that business cycles do not affect all the sector uniformly. Some business are more vulnerable white others are not or less vulnerable to changes in business cycle. Businesses like fashion retailers, electrical goods, restaurants, constructors, advertising, foreign tour operators, etc. are directly linked with economic growth. Such business are called cyclical businesses. So during recession such businesses slump and vice versa.
  • The phase of the business cycle is important to decide on entry into the market by a new firm or to decide about launch of a new product.

CA Foundation Business Economics Study Material – Oligopoly

CA Foundation Business Economics Study Material Chapter 4 Price Determination in Different Markets – Oligopoly

OLIGOPOLY

Introduction:

  • ‘Oligo’ means few and ‘Poly’ means seller. Thus, oligopoly refers to the market structure where there are few sellers or firms.
  • They produce and sell such goods which are either differentiated or homogeneous products.
  • Oligopoly is an important form of imperfect/competition.
  • E.g.- Cold drinks industry; automobile industry; Idea; Airtel. Hutch, BSNL mobile services in Nagpur; tea industry; etc.

Types of Oligopoly:

  • Pure or perfect oligopoly occurs when the product is homogeneous in nature, e.g. Aluminum industry.
  • Differentiated or imperfect oligopoly where products are differentiated. E.g. toilet products.
  • Open oligopoly where new firms can enter the market and compete with already existing firm.
  • Closed oligopoly where entry of new firm is restricted.
  • Collusive oligopoly when some firms come together with some common understanding and act in collusion with each other in fixing price and output.
  • Competitive oligopoly where there is no understanding or collusion among the firms.
  • Partial oligopoly where the industry is dominated by one large firm which is looked upon by other firms as the leader of the group. The dominating firm will be the price leader.
  • Full oligopoly where there is absence of price leadership.
  • Syndicated oligopoly where the firms sell their products through a centralized syndicate.
  • Organized oligopoly where the firms organize themselves into a central association for fixing prices, output, quotas, etc.

Characteristics of Oligopoly Market:

Following are the special features of oligopoly market:

1. Interdependence

  • In an oligopoly market, there is interdependence among firms.
  • A firm cannot take independent price and output decisions.
  • This is because each firm treats other firms as rivals.
  • Therefore, it has to consider the possible reaction to its rivals price-output decisions.

2. Importance of advertising and selling costs

  • Due to interdependence, the various firms have to use aggressive and defensive marketing tools to achieve larger market share.
  • For this the firms spend heavily on advertisement, publicity, sales promotion, etc. to attract large number of customers.
  • Firms avoid price-wars but are engaged in non-price competition. E.g.- free set of tea mugs with a packet of Duncan’s Double Diamond Tea.

3. Indeterminate Demand Curve

  • The nature and position of the demand curve of the oligopoly firm cannot be determined.
  • This is because it cannot predict its sales correctly due to indeterminate reaction patterns of rival firms.
  • Demand curve goes on shifting as rivals too change their prices in reaction to price changes by the firm.

4. Group behaviour

  • The theory of oligopoly is a theory of group behaviour.
  • The members of the group may agree to pull together to promote their mutual interest or fight for individual interests or to follow the group leader or not.
  • Thus the behaviour of the members is very uncertain.

Price and output decisions in an Oligopolistic Market:

As seen earlier, an oligopolistic firm does not know how rival firms react to each other decisions. Therefore, it has to be very careful when it makes decision about its price. Rival firms retaliate to price change by an oligopolistic firm. Hence, its demand curve indeterminate. Price and output cannot be fixed. Some of the important oligopoly models are:

  1. Some economists assume that oligopolistic firms make their decisions independently. Therefore, the demand curve becomes definite and hence equilibrium level of output can be determined.
  2. Some believe that oligopolistic can predict the reaction of rivals on the basis of which he makes decisions about price and quantity.
  3. Cornet considers OUTPUT is the firm’s controlled variable and not price.
  4. In a model given by Stackelberg, the leader firm commits to an output before all other firms. The rest of firms follow it and choose their own level of output.
  5. Bertrand model states PRICE is the control variable for firms and therefore each firm sets the price independently.
  6. In order to pursue common interests, oligopolistic enter into enter into agreement and jointly act as monopoly to fix quantity and price.

Price Leadership:

A large or dominant firm may be surrounded by many small firms. The dominant firm takes the lead to set the price taking into account of the small firms. Dominant firm may adopt any one of the following strategies—

  1. ‘Live and let live’ strategy where dominant firm accepts the presence of small firms and set the price. This is called price-leadership,
  2. In another strategy, the price leader sets the price in such a way that it allows some profits to the follower firms.
  3. Barometric price leadership where an old, experienced, respectful, largest acts as a leader and sets the price. It makes changes in price which are beneficial from all firm’s and industry’s view point. Price charged by leader is accepted by follower firms.

Kinked Demand Curve:

  • In many oligopolistic industries there is price rigidity or stability.
  • The prices remains sticky or inflexible for a long time.
  • Oligopolists do not change the price even if economic conditions change.
  • Out of many theories explaining price rigidity, the theory of kinked demand curve hypothesis given by American economist Paul M. Sweezy is most popular.
  • According to kinked demand curve 4 hypothesis, the demand curve faced by an oligopolist have a ‘Kink’ at the prevailing price level.
  • A kink is formed at the prevailing price because —
    – the portion of the demand curve above the prevailing price is elastic, and
    – the portion of the demand curve below the prevailing price is inelastic

Consider the following figure.
CA Foundation Business Economics Study Material Oligopoly 1

  • In the fig., OP is the prevailing price at which the firm is producing and selling OQ output.
  • At prevailing price OP, the upper portion of demand curve dK is elastic and lower portion of demand curve KD is inelastic.
  • This difference in elasticities is due to the assumption of particular reactions by kinked demand curve theory.

The assumed reaction pattern are –

  1. If the oligopolist raises the price above the prevailing price OP, he fears that none of his rivals will follow him.
    – Therefore, he will loose customers to them and there will be substantial fall in his sales.
    – Thus, the demand with respect to price rise above the prevailing price is highly elastic as indicated by the upper portion of demand curve dK.
    – The oligopolist will therefore, stick to the prevailing prices.
  2. If the oligopolist reduces the price below the prevailing price OP to increase his sales, his rivals too will quickly reduce the price.
    – This is because the rivals fear that their customers will get diverted to price cutting oligopolist’s product.
    – Thus, the price cutting oligopolist will not be able to increase his sales very much.
    – Hence, the demand with respect to price reduction below the prevailing price is inelastic as indicated by the lower portion of demand curve KD.
    – The oligopolist will therefore, stick to the prevailing prices.
    – Each oligopolist will, thus, stick to the prevailing price realising no gain in changing the price.
    – A kink will, therefore, be formed at the prevailing price which remains rigid or sticky or stable at this level.

Other Important Market Forms:

  1. Duopoly in which there are only TWO firms in the market. It is subset of oligopoly.
  2. Monopoly is a market where there is a single buyer. It is generally in factor market.
  3. Oligopsony market where there are small number of large buyers in factor market.
  4. Bilateral monopoly market where there is a single buyer and a single seller. It is mix of monopoly and monopsony markets

CA Foundation Business Economics Study Material – Imperfect Competition : Monopolistic Competition

CA Foundation Business Economics Study Material Chapter 4 Price Determination in Different Markets – Imperfect Competition : Monopolistic Competition

IMPERFECT COMPETITION : MONOPOLISTIC COMPETITION

Introduction

  • We have studied two models that represent the two extremes of market structures namely perfect competition and monopoly.
  • The two extremes of market structures are not seen in real world.
  • In reality we find only imperfect competition which fall between the two extremes of perfect competition and monopoly.
  • The two main forms of imperfect competition are —
    – Monopolistic Competition and
    – Oligopoly

Meaning and features of Monopolistic Competition

  • As the name implies, monopolistic competition is a blend of competitive market and monopoly elements.
  • There is competition because of large number of firms with easy entry into the industry selling similar product.
  • The monopoly element is due to the fact that firms produce differentiated products. The products are similar but not identical.
  • This gives an individual firm some degree of monopoly of its own differentiated product.
  • E.g. MIT and APTECH supply similar products, but not identical.
  • Similarly, bathing soaps, detergents, shoes, shampoos, tooth pastes, mineral water, fitness and health centers, readymade garments, etc. all operate in a monopolistic competitive market.

The characteristics of monopolistic competitive market can be summed up as follows:

  1. Large number of buyers and sellers
    • There are large number of firms.
      – So each individual firms can not influence the market.
      – Each individual firm share relatively small fraction of the total market.
    • The number of buyers is also very large and so single buyer cannot influence the market by demanding more or less.
  2. Product Differentiation
    • The product produced by various firms are not identical but are somewhat different from each other but are close substitutes of each other.
    • Therefore, the products are differentiated by brand names. E.g. – Colgate, Close-Up, Pepsodent, etc.
    • Brand loyalty of customers gives rise to an element of monopoly to the firm.
  3. Freedom of entry and exit
    • New firms are free to enter into the market and existing firms are free to quit the market.
  4. Non-Price Competition
    • Firms under monopolistic competitive market do not compete with each other on the basis of price of product.
    • They compete with each other through advertisements, better product development, better after sales services, etc.
    • Thus, firms incur heavy expenditure on publicity advertisement, etc.

Short Run Equilibrium of a Firm in Monopolistic Competition. (Price-Output Equilibrium)

  • Each firm in a monopolistic competitive market is a price maker and determines the price of its own product.
  • As many close substitutes for the product are available in the market, the demand curve (average revenue curve) for the product of individual firm is relatively more elastic.

The conditions of equilibrium of a firm are same as they are in perfect competition and monopoly i.e.

  1. MR = MC, and
  2. MC curve cuts the MR curve from below.

The following figures show the equilibrium conditions and price-output determination of a firm under monopolistic competition.

When a firm in a monopolistic competition is in the short run equilibrium, it may find itself in the following situations —

  1. Firm will earn SUPER NORMAL PROFITS if its AR > AC;
  2. Firm will earn NORMAL PROFITS if its AR = AC; and
  3. Firm will suffer LOSSES if its AR < AC

1. Super Normal Profits (AR > AC):
CA Foundation Business Economics Study Material Imperfect Competition Monopolistic Competition 1
CA Foundation Business Economics Study Material Imperfect Competition Monopolistic Competition 2
The firm will earn NORMAL PROFITS if AC curve is tangent to AR curve i.e. when AR=AC

2. Losses (AR < AC):
CA Foundation Business Economics Study Material Imperfect Competition Monopolistic Competition 3

The firm may continue to produce even if incurring losses if its AR ≥ AVC.

Long Run Equilibrium of a Firm in Monopolistic Competition

  • If the firms in a monopolistic competitive market earn super normal profits, it attracts new firms to enter the industry.
  • With the entry of new firms market will be shared by more firms.
  • As a result, profits per firm will go on falling.
  • This will go on till super normal profits are wiped out and all the firms earn only normal profits.

CA Foundation Business Economics Study Material Imperfect Competition Monopolistic Competition 4

  • In the long run firms in a monopolistic competitive market just earn NORMAL PROFITS.
  • Firms operate at sub-optimal level as shown by point ‘R’ where the falling portion AC curve is tangent to AR curve.
  • In other words firms do not operate at the minimum point of LAC curve ‘L’.
  • Therefore, production capacity equal to QQ, remains idle or unused called excess capacity.
  • This implies that in monopolistic competitive market —
  • Firms are not of optimum size and each firm has excess production capacity
  • The firm can expand its output from Q to Q, and reduce its average cost.
  • But it will not do so because to sell more it will have to reduce its average revenue even more than average costs.
  • Hence, firms will operate at sub-optimal level only in the long run.

CA Foundation Business Economics Study Material – Concepts of Product

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Concepts of Product

Product i.e. output refers to the volume of goods produced by a firm in a particular period of time.
There are three concepts relating to the physical production by factors namely-

  1. Total Product (TP),
  2. Average Product (AP), and
  3. Marginal Product (MP).

1. Total Product (TP):

  • The total output produced by all the factors per unit of time is called total product.
  • Total product increases with an increase in the variable factor input.
  • Column Nos. (1) and (2) of the following table shows a total product schedule.

2. Average Product (AP):

  • The. average product means the total product per unit of a variable factor.
  • In other words, it is the total product divided by the number of units of a variable factor.<CA Foundation Business Economics Study Material Concepts of Product 1
  • Column No. (3) of the following table shows the average product of variable factor.

3. Marginal Product (MP):

  • The marginal product means addition made to total product by the use of an extra unit of variable factor.
  • It may be stated as-
    MPn = TPn – TPn-1
    where,
    MPn = Marginal product when ‘n ’ units of variable factors are used
    TP = Total Product
    n = number of units of variable factors used.
  • Marginal Product may also be defined as the change in total output due to use of additional unit of variable factor
    CA Foundation Business Economics Study Material Concepts of Product 2
    Where –
    Δ = a small change Column No. (4) of the following table shows the marginal product schedule.

Table: Product Schedule

Units of Variable Total Product (TP) factor E.g. LABOUR Average Product (AP) Marginal Product (MP)
1 10 10 10
2 30 15 20
3 60 20 30
4 80 20 20
5 90 18 10
6 90 15 0
7 85 12.1 -5

Average product and Marginal product are related to one another.

(i) – When average product of the variable factor is rising, marginal product of the variable factor is more than its average product.
– So when average product curve is rising, the marginal product curve will lie somewhere above it.

(ii) – When average product of the variable factor is falling, marginal product of the variable factor is less than its average product.
– So when average product curve is falling, the marginal product curve will lie somewhere below it.

(iii) – When average product of the variable factor is maximum and constant, marginal product is equal to average product.
– In other words, the marginal product curve cuts the average product curve at its maximum point.

CA Foundation Business Economics Study Material – Fixed Inputs (Fixed Factors) and Variable Inputs (Variable Factors)

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Fixed Inputs and Variable Inputs

Fixed Inputs (Fixed Factors) and Variable Inputs (Variable Factors)

Comparison Fixed Inputs Variable Inputs
(i) Meaning
  • The factors which cannot be easily and quickly changed and require long time to make adjustment in them with the changes in the level of output are called fixed inputs or fixed factors of production.
  • In other words, factor inputs whose quantity does not vary from day-to-day are called as fixed inputs.
  • The factors which can be easily and quickly changed and readily adjusted with the changes in the level of output are called variable inputs or variable factors of production.
  • In other words, factor inputs whose quantity may vary from day-to-day are called as variable inputs.
(ii) Examples
  • Examples of fixed inputs – buildings, machinery, plant, top management, etc.
  • It requires long time to make variations in them.
  • E.g. To construct a new factory building with a larger area and capacity.
  • Examples of variable inputs – ordinary labour, raw-material, power, fuel chemicals, etc.
  • It can be readily changed.
(iii) Relation with Output
  • Fixed inputs do not vary with the level of output.
  • Its quantity remains the same, whether the output is more or less or zero in SHORT RUN
  • Variable inputs vary directly with the level of output.
  • Such factors are required more, when output is more; less, when output is less and zero, when output is zero in SHORT RUN.
(iv) Cost
  • The cost of the fixed inputs is called FIXED COST.
  • In the short run the firm has to bear the fixed cost even if the output is zero.
  • Since the quantity of fixed inputs remains the same, fixed cost remains the same whatever be the level of output.
  • The cost of the variable inputs is called VARIABLE COST.
  • Since variable inputs vary directly with the level of output, variable costs are also positively related with output. If output is zero, variable cost is also zero.
  • If output is increased variable cost also increases and vice-versa.

Short Run (Short Period) & Long Run (Long Period)

Comparison Short Run Long Run
(i) Meaning
  • The short run is defined as the period of time in which some factors of production or at least one factor is fixed i.e. does not vary with output.
  • Thus, in the short period some factors are FIXED FACTORS E.g. Factory building, machinery, management, etc. and some are VARIABLE FACTORS E.g. Labour, raw-material, power, fuel, etc.
  • The long run is defined as the period of time in which all factors may vary.
  • In the long run, all factors become variable and so there is no distinction between fixed and variable factors.
(ii) Scale of Production OR Size of the Firm
  • In the short run, the output is produced with a GIVEN SCALE OF PRODUCTION i.e. the size of plant or firm (and so the production capacity) remains unchanged.
  • Hence, production can be increased or decreased only by changing the amount of variable factors.
  • In the long run, the output is produced with the CHANGE IN THE SCALE OF PRODUCTION i.e. the size of plant or firm can be increased (and so the pro­duction capacity).
  • Hence, production can be increased by varying all factors i.e. fixed factors (of short period) as well as variable factors.
(iii) Produc­tion Law
  • The production function which is studied in the short run period is called as the Law of Variable Proportions.
  • The production function which is stud­ied in the long run period is called as the Law of Returns to Scale.
(iv) Decisions about Change in factors
  • The decisions to change the amount of variable factors (like raw material, labour, etc.) are taken very frequently depending upon changes in demand of the commod­ity.
  • Hence, short run is the ‘ACTUAL PRO­DUCTION PERIOD’ during which some factors are fixed while some are variable.
  • Thus, firms operate in the short run period.
  • The decisions to change the amount of fixed factors i.e. scale of production or to close down the firm are taken only once in a while.
  • Hence, long run is the ‘PLANNING PERIOD’.
  • Thus, firms plan in the long run period.
(v) Nature of Supply
  • In the short run period, supply can be adjusted upto a limited extent as per changes in demand.
  • In other words, supply is relatively inelastic.
  • In the long run period, supply can be fully adjusted as per changes in demand.
  • In other words, supply is relatively elastic.
(vi) Nature of Cost
  • In short run period, cost is classified as FIXED COST and VARIABLE COST.
  • Fixed cost is the cost of fixed inputs and Variable cost is the cost of variable inputs.
  • Fixed cost is the main feature of short run period
  • In long run period ALL COSTS ARE VARIABLE.
  • Variable cost is the main feature of long run period.
(vii) Effect on Price
  • In short-run, the price determination of a commodity is more influenced by –
    (a) The demand forces than supply forces because supply in short-run is rela­tively inelastic, and
    (b) The UTILITY of the commodity.
  • The short-run price is called SUB-NOR­MAL PRICE
  • In long-run, the price determination of a commodity is more influenced by-
    (a) The supply forces than demand forces because supply in long-run is relatively elastic, and
    (b) The COST OF PRODUCTION of the commodity.
  • The long-run price is called NORMAL PRICE.
(viii) Average Cost Curve
  • The short-run average cost curve is ‘U’ shaped.
  • Its U-shape is explained with the Law of Variable Proportions.
  • The long-run average cost curve is also U shaped.
  • But its U- shape is not as prominent as short-run average cost curve.
  • Its U-shape is explained with the Law of Returns to Scale.
  • Long-run average cost curve is also called ‘PLANNING CURVE’ and ‘ENVELOPE CURVE’.
(ix) Profit of Firms In the short-run period –

  • The firms under perfect competition on being at equilibrium may earn normal profits, super normal profits or incur losses;
  • The monopoly firm on being at equi­librium may earn normal profits, super normal profits or incur losses;
  • The firms under monopolistic competi­tion on being at equilibrium may earn normal profits, super normal profits or incur losses.
In the long run period-

  • The firms under perfect competi­tion earn only NORMAL PROFITS and operate at optimum level.
  • The monopoly firm can earn SUPER NORMAL PROFITS and operate at sub-optimum level.
  • The firms under monopolistic competition earn only NORMAL PROFITS and operate at sub-opti­mum level.

CA Foundation Business Economics Study Material – Production Function

CA Foundation Business Economics Study Material Chapter 3 Theory of Production and Cost – Production Function

Production Function

  • Output is a function of inputs i.e. factor services such as land, labour and capital which are used in production. In other words, production is a transformation of PHYSICAL INPUTS into PHYSICAL OUTPUT.
  • The functional relationship between physical inputs and physical output, per unit of time under a given state of technology is called production function.
  • It can also be expressed in the form of a mathematical equation in which output is the dependent variable and inputs are the independent variables.
    Q = f (a, b, c ………… n)
    Where –
    Q denotes quantity of output of a commodity per unit of time
    f stands for function of i.e. depends on a, b, c,… n denotes quantity of various inputs.

Assumptions of Production Function:
The production function is based on the following assumptions:

  1. It is specified with reference to a specified period of time.
  2. It is assumed that the state of technology remains the same, during the period of time.
  3. It is assumed that the firm uses best and most efficient technique available in production.
  4. It is assumed that the factors of production are divisible into viable units.

The production function can be explained under two heads:
1. The short run production function in which input – output relations are analysed where –

  • One input is variable, all other inputs are fixed, (described as the Law of Variable Proportions) OR
  • Two inputs are variable, all other factors are fixed (explained with the help of isoquants)

2. The long run production function in which input- output relations are analysed where all the inputs are variable (described as the Law of Returns to Scale).

Cobb-Douglas Production Function
Q = f (L, K).
Where –
Q = Output; L = Labour; K = Capital

Paul H. Douglas and C.W. Cobb of the U.S.A. studied the production function of the American manufacturing industries. This production function applies to the whole of manufacturing in U.S.A. rather than to an individual firm. In this case, output is manufacturing production and inputs used are labour and capital.

The conclusion of study is that labour contributed 3 /4th and capital about 1 /4th in the manufacturing production.